3545 cadillac avenue ? costa mesa, ca 92626-1401 ? (714) 433-1200 ? fax (714) 433-1234 marketing bulletin date: march 24 th , 2006 to: all sales personnel from: mark stoner re: product termination to all concerned parties, this bulletin is to notify all customers of the discontinuation of the following ecliptek series effective march 24 th , 2006: series description recommended replacement E13C4 3.3v 5 x 7mm smd lvpecl oscillator e13c7 or e13d8 in compliance with our end of life (eol) policy, this will serve as advanced notice of product termination. new orders wil l not be accepted after april 1 st , 2007, with delivery to conclude by july 1 st 2007. if there are any questions pertaining to this bulletin, please fell free to contact me. thank you again for your cooperation. best regards, mark w. stoner director of marketing ecliptek corporation
manufacturer category series package voltage class rev . date ecliptek corp. oscillator E13C4 ceramic 3.3v os1a 04/03 E13C4 series oscillator E13C4 notes _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _____________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _____________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _____________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ ________________________________________________________________________ _______________________________________________________ ___________________________ electrical specifications 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. ? rohs compliant (pb-free) lvpecl output oscillators 3.3v supply voltage at-cut third overtone crystal ceramic 6-pad smd package stability to 25ppm tri-state output complementary output 0c to 70c, -5c to 85c, or -40c to +85c -55c to 125c 3.3v dc 5% 75ma maximum 100ppm, 50ppm, or 25ppm maximum v cc -1.025v dc minimum v cc -1.620v dc maximum 1 nseconds maximum 50 10(%) 50 5(%) 50 ohms into v cc -2.0v dc complementary output and tri-state enables output enables output disables output: high impedance 10a maximum 10 mseconds maximum 0.24 psec typical, 1 psec maximum 3 psec typical, 5 psec maximum nominal frequency operating temperature range storage temperature range supply voltage (v cc ) input current frequency tolerance / stability output voltage logic high (v oh ) output voltage logic low (v ol ) rise time / fall time duty cycle load drive capability logic control / additional output tri-state input voltage standby current start up time rms phase jitter rms period jitter inclusive of operating temperature range, supply voltag, load, and 1st year aging at 25c 20% to 80% of waveform at 50% of waveform v ih of 70% of v cc minimum no connection v il of 30% of v cc maximum without load fj = 12khz to 20mhz 100mhz, 106.250mhz, 125mhz, 133.333mhz, 155.52mhz, 156.25mhz, 161.1328mhz or 166mhz h 2.0 l 7.0 w 5.08
line 1: ecliptek line 2: xx.xxx m frequency in mhz (5 digits maximum + decimal) line 3: xx y zz week of year last digit of year ecliptek manufacturing identifier manufacturer category series package voltage class rev . date ecliptek corp. oscillator E13C4 ceramic 3.3v os1a 04/03 mechanical dimensions all dimensions in millimeters environmental/mechanical specifications marking specifications tape and reel dimensions all dimensions in millimeters suggested solder pad layout all dimensions in millimeters 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. E13C4 e 2 f - 155.520m tr part numbering guide available options blank=tubes tr=tape and reel (standard) frequency logic control/additional output f=complementary output and tri-state duty cycle 1=50% 10%, 2=50% 5% frequency tolerance & stability/ operating temperature range c=100ppm maximum over 0c to +70c d=50ppm maximum over 0c to +70c e=25ppm maximum over 0c to +70c g100ppm maximum over -40c to +85c h=50ppm maximum over -40c to +85c j=25ppm maximum over -40c to +85c l=100ppm maximum over -5c to +85c m=50ppm maximum over -5c to +85c n=25ppm maximum over -5c to +85c pin 1: tri-state pin 2: no connect pin 3: case ground pin 4: output pin 5: complementary output pin 6: supply voltage a b c d e f 16.3-.1 7.5.1 6.75.1 4 .1 2.1 f g h j k l 8.1 b0* 1.5 +.1-0 a0* .3 .05 k0* tape m n o p q 1.5 min 50 min 20.2 min 13.2 40 min r s t u v qty/reel 2.5 min 10 min 22.4 max 360 max 16.4+2-0 1,000 reel *compliant to eia 481a tolerances= +0.1 characteristic specification fine leak test mil-std-883, method 1014, condition a gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-202, method 213, condition c vibration mil-std-883, method 2007, condition a solderability mil-std-883, method 2002 temperature cycling mil-std-883, method 1010 resistance to soldering heat mil-std-202, method 210 resistance to solvents mil-std-202, method 215
|
